LIGHT BAR SYSTEM
It is an ideal solution for high volume of entrances where the quickness and safety is very important. High damaging- resistant construction with touch-button.

COMFORT SYSTEM
This tester provides very easy entrance with RFID reader which make the personal identification and transfer the data (personal and measuring data) to a PC. The Management software handles the personal identification, test methods and results. The data can be read and saved from the PC. If the PC is connected to LAN network, the Management software is available on the inter-net. Many AIJGO-31LB/ALU testers are possible to be connected a network.

It is versatile tester because you can choose the right measuring methods by the Management software personally with the (Personal Chip Card) according to entrance regulation: Only footwear testing or footwear and wrist strap combined testing or VIP. You have to make only one test at the same time for the left and right foot because of the dual foot electrode. It can be con-nected to any kind of entrance gate (tripod turnstile, swing gate, wing barrier,…) with a relay output.

COMPLEX SYSTEM
AIJGO-32LB/ALU tester built in a AS 110 turnstile gate.
Versatile tester that uses a Personal Chip Card to select a measurement method according to the entry person and the entrance control: Only a footwear test or a footwear and wrist straps combined test or VIP. Thanks to the dual leg electrode, only one test is performed that simultaneously measures the right and left legs.

RFID READER
Multifunctional RFID Reader that can handle most of the known RFID standards.

LF - low frequency - readers (125/134 kHz):

* eMarine (EM4100,4102,4200)
* HID ProxCard II
* Indala
* Indala Kantech
* ISO18000
* ISO 11784/85 HDX
* ISO11784/85 FDX(-B)
* TI RFID (Tiris, pl. RI-TRP-R4FF, RI-TRP-W4FF)
* Casi Rusco
* HITAG 1/S
* HITAG 2

HF - high frequency - readers (13,56 MHz): ISO-14443A type of encoders:

* Mifare Classic (1k/4k)
* Mifare Ultralight
* Mifare DESFire
* Mifare Plus
* Mifare ProX
* Mifare SmartMX

ISO-15693 encoders type:

* Texas Instruments TAG-IT Plus
* Texas Instruments TAG-IT Standard
* Texas Instruments TAG-IT Pro
* PicoPass
* HID iClass
* Legic Advant

ISO-14443B type of encoders:

* SRI512, SRT512, SRI4K, SRIX4k
* ISO-14443B type of card emulation

ISO-18092/NFC type of communication:

* P2P active communication under NFCIP-1
* NFC card emulation (passive)
* Mobile phones with NFC function (Android, iOS, Windows Mobile) in the previously listed modes

Existing work time recording and access control system can be coordinated (separate development, under an agreement).