1. Home
    2. Antistatic ESD Flooring

    ESD Floor Coating Anti Static Electroguard A40® Acrylic Static Dissipative Paint | A40-7004 / 850-A40-7004 / ESDproducts
    Back

    Anti-Static Floor Finish Electroguard A40® Acrylic ESD Paint Colour 7004 esdfloorcoatings ESDproducts EDSON
    ESD

    ESD Acrylic Static Dissipative Paint | Electroguard A40® | Colour 7004 | Light-Grey | 5 Litres

    850-A40-7004
    HS Code : 32099000
    Brand
    222,00 € exc tax
    Packaging Unit :
      Add To Cart
      Add To WishList
      Tell A Friend

    This Acrylic Static Dissipative (Conductive) paint Electroguard A40® is water based paint.
    A40® Paint Coatings will be fine for general light foot traffic.

    *Single Part Acrylic ESD Paint
    *2 coats recommended
    *Coverage 10m² per litre
    *This coating requires Single Part Primer EM367

    Available models

    Product Description

    We offer two ESD paints,  Electroguard E30 or Electroguard A40.
    Electroguard E30 will give a more durable finish but A40 will be fine for general light foot traffic.
    Both give the same colour, floor finish and ESD reading.

    If the floor is bare concrete we would recommend the use of a Water Based Sealer/Primer first of all.
    The key requirement is that the primer is WATER based, not solvent based.
    If the floor is already painted and in good condition then you can simply paint over the current surface, see application details.

    		  
    Technical Details
    Model
    _
    Paint Type
    Electroguard A40®
    Coverage
    10 m² Litre per coat (we recommend 2 coats)
    Pack Size
    5 litres
    Drying Time @ 20C
    Touch Dry 2 Hrs - Re-Coat at 8-10 Hrs - Full Cure 3 Days
    Paint Colour
    Light Grey | RAL 7035
    Colour Symbol
     
    Mix Ratio
    Ready Mixed. do not thin
    VOC Content
    60.5g/litre
    Typical Thickness
    40 microns per coat. two thin layers. Do not over apply thickness
    Thinner
    We do NOT recommend thinning this paint
    Surface Resistance
    10^5-10^8 Ohms/Square
    Resistance to Ground:
    10^5-10^8 Ohms/Square
    Size
    23 x 18 cm
    Weight
    6.2 Kg
    Conforms to
    IEC 61340-5-1/2
    Charge Decay
    Conforms to MILB81705C
    Composition
    One component
    Minimum Order Quantity
    20 litres (4 tins)

    All ESD products fulfill the IEC 61340 standards.
    We believe all the information in these pages including technical data to be reliable.
    However we make no warranties expressed or implied and assume no liability regarding any use of this information.


    ESD AUDIT, TRAINING & SUPPORT
     
    © 2024  [mn]medianet . All Rights Reserved

    This website uses cookies.If you continue to use the website we assume your consent.For more information see the privacy policy of this website   OK 

    سیستم همکاری در فروش کانال پروکسی تلگرام کاندوم اسپری تاخیری ایموشن proxy for telegram کسب درآمد کانال پروکسی تلگرام خرید کتاب سیستم های همکاری در فروش کانال سک30در تلگرام کسب درآمد از اینترنت کانال تلگرام دستگاه وکیوم مردانه