1. Home
    2. Antistatic ESD Flooring

    ESD Floor Coating Anti Static Electroguard E30® Polyurethane Static Dissipative Paint | E30-7004 / 850-E30-7004
    Back

    Electroguard E30® Polyurethane ESD Paint Colour 7004 Paint E30-7004 850-E30-7035 esdfloorcoatings EDSON
    ESD

    ESD Polyurethane Static Dissipative Paint | Electroguard E30® | Colour 7004 | Light-Grey | 5 Litres

    850-E30-7004
    HS Code : 32099000
    Brand
    271,00 € exc tax
    Packaging Unit :
      Add To Cart
      Add To WishList
      Tell A Friend

    Electroguard E30® is a water based Polyurethane Static Dissipative Paint.
    Electroguard E30® paint will give a more durable finish.

    *2 Components Paint (activator included)
    *2 coats required
    *Coverage 10m² per litre
    *This coating requires Two Part Primer EP131

    Product Description

    We offer two ESD paints,  Electroguard E30 or Electroguard A40.
    Electroguard E30 will give a more durable finish but A40 will be fine for general light foot traffic.
    Both give the same colour, floor finish and ESD reading.

    If the floor is bare concrete we would recommend the use of a Water Based Sealer/Primer first of all.
    The key requirement is that the primer is WATER based, not solvent based.
    If the floor is already painted and in good condition then you can simply paint over the current surface, see application details.

    		  
    Technical Details
    Model
    _
    Paint Type
    Electroguard E30®
    Coverage
    9 m² per litre per coat (we recommend 2 coats)
    Pack Size
    5 litres
    Drying Time @ 20C
    Touch Dry 3hrs - Re-Coat at 16 hrs - Full Cure 3 days
    Paint Colour
    Light Grey | RAL 7035
    Colour Symbol
     
    Mix Ratio
    Base / Activator supplied in correct ratio - Base 4 parts : Activator 1 part - Do not thin
    VOC Content
    25g/litre
    Typical Thickness
    40 microns per coat. two thin layers. Do not over apply thickness
    Surface Resistance
    10^5-10^8 Ohms/Square
    Resistance to Ground:
    10^5-10^8 Ohms/Square
    Size
    23 x 18 cm | 12 x 11.5 cm
    Weight
    Base: 6.0 Kg | Activator: 1.1 Kg
    Conforms to
    IEC 61340-5-1/2
    Charge Decay
    Conforms to MILB81705C
    Composition
    Two components
    Minimum Order Quantity
    20 litres (4 tins)

    All ESD products fulfill the IEC 61340 standards.
    We believe all the information in these pages including technical data to be reliable.
    However we make no warranties expressed or implied and assume no liability regarding any use of this information.


    ESD AUDIT, TRAINING & SUPPORT
     
    © 2024  [mn]medianet . All Rights Reserved

    This website uses cookies.If you continue to use the website we assume your consent.For more information see the privacy policy of this website   OK 

    سیستم همکاری در فروش کانال پروکسی تلگرام کاندوم اسپری تاخیری ایموشن proxy for telegram کسب درآمد کانال پروکسی تلگرام خرید کتاب سیستم های همکاری در فروش کانال سک30در تلگرام کسب درآمد از اینترنت کانال تلگرام دستگاه وکیوم مردانه